Tips For Replacing a Window Handle
It is simple to change your window handle from the comfort of your home. Follow these handy tips for an easy operation and a beautiful appearance.
Start by removing the screw covers to expose the screws within the uPVC window handle. Then measure the spindle length to ensure you get the right size replacement.
1. Measure the Spindle length
When you're replacing a window handle it's crucial to determine the size of the spindle right. It could influence the tightness or looseness of the handle and whether the handle locks correctly into the frame of the window. The spindle is the steel shaft that connects to the handle and the lock in the window frame. The spindle is available in the standard 8mm industry cross-section or the more traditional 9mm versions. The current industry standard is 8mm, but this was not always the case, so when purchasing a new handle, it's essential to check the dimensions.
The easiest method of measuring the spindle length is to take off the handle you have already installed, this can be done by turning it into the open position and then removing the two screws (which may be hidden behind plastic caps that need to be removed) that hold the handle. Once removed take a measurement from the base of the handle to the end of the spindle. This will provide you with the measurements needed to buy a replacement.
There are a lot of options to consider when choosing the right window handle from sleek chrome that can fit into a contemporary home to traditional burnished brass that looks wonderful in restored Georgian rooms or even the more quaint Tudor cottages with curled monkey tail latches! There are many options, but the most important thing is to select a style that matches your home's decor.
Espag handles are commonly used to uPVC window frames and are always the exact same size with a 43mm center. Cockspur handles vary between 58mm and 62mm however there are replacements for both sizes. Window handles from Cadenza come in distinct dimensions as they feature an angle blade that operates an interlocking mechanism that is multi-point inside the window.
Another factor when choosing the best window handle is knowing what hand you will need to use, which is defined by the hand you use to open the door. Inline espag handles can be used with either left or right-handed windows. Cranked window handles are hand-operated and can only be used on windows that open in one direction.
2. Take the handle off
A window handle that has fallen out can be a hassle, regardless of regardless of whether the handle has been damaged or worn out. The good news is, you can repair a uPVC handle yourself. You will require only a few basic hand tools and time to complete this process.
First, you must open the window and ensure that it is in an unlocked position. Then, take off the screw caps holding the handle in place. Once the screw caps are removed you will be able to remove the handle.
The handle itself is attached to a spindle within the window frame. Based on the type, this is held in place either with a screw or pin. The most common handles are the inline Espagnolette and the cockspur handles. Both types of handles are found on casement windows, including aluminum ones. window handles www.repairmywindowsanddoors.co.uk can be locked with keys to stop unauthorised opening of the window from outside, or you can lock them by turning the handle clockwise.
To remove the handle, you will need to use a flat blade screwdriver to release the clip holding the handle. Once this is released, the handle will slide off the spindle. After the handle has been removed, you will need to measure the length of the spindle to ensure that your new handle is compatible with this size.
Once you've determined the correct size for the handle, screw it into the correct position. It is important to make sure that the handle is securely attached and that it is rotating in the correct direction (clockwise if the handle is open or counterclockwise if the handle is closed). It is crucial to ensure that the handle hasn't been placed upside down.
Replace the cap screws. After you have completed this step, you can test your handle to make sure that it's working properly. You can also test the locking mechanism by moving the handle from an unlocked position to the locked and then back.
3. Take off the Screws
A uPVC handle is an essential element of any home and is the first item to show signs of wear or damage. It can be caused by natural elements or by regular use and sometimes even malicious damage caused by opportunistic criminals who might seek to open a closed window and gain access to your home. A simple replacement can solve the problem and prevent it from happening again.
UPVC handles can also be difficult to remove if the locking mechanisms are not working correctly. Most of the time, the issue can be solved by replacing the multipoint lock rather than the entire handle. It's certainly worth checking this because it could save you money.
Once you've removed the old handle you'll need to remove the screws that were fixing it to the base. These are typically located on the inside face of the base. It may be necessary to use a screwdriver to accomplish this. Be cautious not to over tighten the handle since this could cause it to loosen.

You'll then have to find the fixing pins or screws that hold the new handle in place. They're usually on the inside of the handle base. You will need a screwdriver to take them off. Once they're removed you will be required to replace the caps on screws should you choose to do so, and then test the new handle to confirm that it's working correctly.
Install the handle by aligning the spindle to the cutout in the window mechanism. Then screw it into. Make sure the handle is in an open position and that any screws are securely secured prior to replacing the screw covers should you wish to do so. You're done! Now you can enjoy your newly installed window handle. This should help you avoid costly door and window replacements in the near future. Contact us if need more information on this or any aspect of your uPVC window.
4. Fit the New Handle
The replacement of a damaged window handle or updating it is simple and can be accomplished in only a few simple steps. Identifying the type of window handle, determining its spindle length, and knowing what tools you'll need to finish the job are crucial. Always consider security when working with windows and tools. Take your time to follow the steps and ensure that you have the right handle to use.
The first step is to locate the screws that hold your existing window handle and remove these, whilst keeping an adequate grip on the handle to prevent it from falling and result in injury. After the screws have been removed, you can place them in a safe location to be replaced later.
After the handle that was used previously is removed, you are now able to begin fitting your new one. It is essential that the handle is fitted perfectly to ensure it functions correctly and locks the window in its place. The next step is to slide the metal square at the back of the handle into the hole in your window mechanism, making sure it is secure.
Once the new handle is in place, the final step is to replace the caps on the screws and test it to make sure it functions. If you aren't satisfied with the outcome or if your window doesn't open and close as it should the next step is to contact our experts who can assist you.
The majority of homes in the UK have uPVC windows and as so, a large number of them will need to be replaced in the near future because of wear or damage. Anyone with some DIY experience can easily accomplish the task. It is crucial that the handle you use is in line with the style and size of your window. If you're not sure what type of handle you require, please contact our team who will be able to provide you with the choices available.